← Back to Blog

What's Included in a Home Automation Quote, Ahmedabad

Short answer first: a home automation quote from Agrima covers system design, all automation hardware, installation, programming and commissioning, a full day of handover training, and 12 months of support — but it does not cover the automation cabling itself, which your electrical contractor lays to a cabling schedule we provide, nor civil work, false ceilings or electrical work outside the automation scope. The confusion this causes is real, and it's worth being explicit about before a buyer finds it out mid-project rather than before signing.

What's Actually Included

Every Agrima quote covers the same five things, regardless of platform or project size:

This list doesn't change based on whether a project runs on KNX, Crestron or Lutron — what changes between platforms is the cost of delivering it, covered below, not which of these five things is covered.

What's Not Included, and Why

Said plainly, because a buyer finding this out mid-quote is a worse experience than reading it here first: the automation cabling itself, civil work, false ceilings, electrical work outside the automation scope, and the light fittings themselves where a separate lighting designer has specified them are not in an Agrima quote. These are real costs on any automation project — they don't disappear because they're not on our invoice, they're simply billed by whichever trade actually does that work — and we'd rather name them clearly up front than have them surface as a surprise once work has already started on site.

Practical tip

Ask any integrator — Agrima included — for the full list of what's excluded, not just what's included. A quote that only states inclusions can look more complete than it actually is; the exclusions are where surprise costs usually come from.

The Cabling Question Specifically

This is worth its own section because it's the single most common point of confusion: Agrima's quote includes the automation hardware and a complete cabling schedule — exactly which cable goes where, to which device — but the physical work of laying that cable is your electrical contractor's scope, done to our schedule, not ours. This isn't a cost-cutting move; it reflects how automation cabling is actually coordinated on a real build, alongside the rest of the electrical first-fix, by the same contractor already running conduit and wiring through the property — splitting that work between two separate trades on site would be slower and more error-prone, not cheaper. Several of Agrima's own pages stated this differently until a correction in late October 2026 — automation cabling had been described inconsistently across a few pages — and the position has since been made consistent everywhere: Agrima provides the schedule, your electrician lays the cable.

What Handover Documentation You're Entitled To

Beyond the walk-through and keypad/app training already covered above, a genuinely complete handover includes real documentation, not just a verbal explanation on the day. On request, once the final payment is cleared, Agrima provides the system's own programming on every platform — the ETS project file on KNX, and on Crestron or Lutron, access to the project on the manufacturer's cloud or a transfer to an integrator you appoint — together with the admin credentials and the as-built system drawings. This matters for a practical reason that has nothing to do with Agrima specifically: it's what lets the system be maintained or extended later by anyone, not only by whoever originally installed it. A quote that's silent on this point is a quote where the buyer doesn't actually know what they own at the end of the project, beyond the physical hardware on the walls.

Why the Same Inclusion List Costs Differently by Platform

The five inclusions above are identical across platforms, but what each one costs to deliver is not:

ComponentCrestronLutronKNX
ProcessorHighestMiddleLowest
KeypadsHighestMiddleLowest
InstallationHighestMiddleLowest
AV integrationDeepest, costs mostPaired with another systemPaired with another system

Crestron costs more largely because of processor and keypad hardware and its native AV distribution — worth paying for on a property that needs deep AV integration, and money spent on capability a smaller project doesn't need. KNX is the most cost-effective largely because its modular, per-room devices scale with switching points rather than being priced around a large central processor. Neither column is automatically the right or wrong answer; it depends on the actual project. A full breakdown is in our cost guide.

What This Actually Looks Like on a Real Project

Put concretely, against a typical 3BHK scope: system design means Agrima walks the site (or works from drawings for a new build), agrees which rooms get which scenes, and specifies every keypad location before anything is ordered — not a generic layout applied regardless of the floor plan. All automation hardware means every processor, keypad, dimmer, sensor and actuator the design calls for, specified and supplied as part of the quoted price, alongside a cabling schedule naming exactly which cable type runs to which point. Installation, programming and commissioning means Agrima's own certified team physically fits that hardware, writes and tests every scene and automation rule, and confirms it all behaves as designed before calling the project finished — not before. The handover day means a real walk-through of every room with the people who'll actually live with the system, not a rushed demonstration to whoever happened to be free that afternoon. And the included year means that if a scene needs adjusting once the family has actually lived with it through a full season, that's a phone call, not a new invoice.

What doesn't appear on that same invoice: the electrician who ran Agrima's cabling schedule, the carpenter who built the false ceiling the keypads sit in, and the lighting designer's own fittings if one was engaged separately. All genuinely necessary, all billed by the trade actually doing that work, not folded into the automation line to make one number look smaller than the real total cost of the project.

How the Package Tiers Relate to This List

Agrima's Diamond, Platinum, Gold and Silver packages each combine platforms differently — Diamond pairs CasaDigi with Lutron, Platinum pairs Crestron with Lutron, Gold runs everything on Crestron, and Silver runs on KNX — but the same five-item inclusion list applies to every package. Choosing a package decides which platforms deliver the system and at what relative cost, not whether design, installation, training or the included support year are part of the quote; those are constant across every tier.

Want a Real, Itemised Quote?

Share your floor plan or project details and we'll scope a quote that names exactly what's included, what isn't, and why — before you commit to anything.

Book a Consultation

What to Ask Any Integrator Before Signing

A short, honest checklist worth raising with any integrator, not just Agrima. None of these questions should feel awkward to ask, and a quote that answers them clearly before you sign is a better sign than one that only answers them after a problem comes up:

Why Agrima

Agrima Solutions is a KNX Gold Partner, Official Crestron Partner and Lutron dealer with offices in Ahmedabad and Rajkot. Every quote lists inclusions and exclusions plainly, including the cabling-schedule split explained above, rather than leaving a buyer to discover scope gaps mid-project. That honesty extends to the documentation point above too: a certified integrator with nothing to hide hands over the programming files on request, because a system that only one company can ever touch again isn't a selling point, it's a dependency. What clients say once a project is actually delivered is on our testimonials page. For the full cost breakdown by platform, see our cost guide.

Frequently Asked Questions

What does a home automation quote from Agrima actually include?

System design, all automation hardware (plus the cabling schedule), installation, programming and commissioning, a full day of handover training, and 12 months of support after handover — the same five items regardless of platform.

Does the quote include the cabling itself?

No — it includes the cabling schedule (exactly which cable goes where) but not the physical work of laying it, which is your electrical contractor's scope, coordinated with the rest of the property's electrical first-fix.

Why isn't civil work or false ceiling work included?

Those are outside the automation scope entirely — real costs on any project, handled by the relevant trade, and named clearly rather than folded into an automation quote where they'd be easy to miss.

Are light fittings included in the quote?

Not where a separate lighting designer has specified them — those are that designer's scope. Agrima's own architectural lighting projects, where Agrima also designs the lighting, are scoped differently; ask directly which applies to your project.

Why does the same inclusion list cost differently on Crestron vs KNX?

The list of what's included doesn't change by platform — what differs is hardware and installation cost. Crestron's processor, keypad hardware and native AV integration cost more; KNX's modular, per-room devices make it the most cost-effective overall.

Does every package tier include the same things?

Yes — Diamond, Platinum, Gold and Silver differ in which platforms deliver the system and at what relative cost, not in whether design, installation, training or the included support year are part of the quote.

What happens if I find a cost later that wasn't in the original quote?

That shouldn't happen if the quote named exclusions clearly up front — which is exactly why asking for the full exclusion list, not just the inclusion list, matters before signing with any integrator.

Is support included in the quote price, or billed separately?

12 months is included at no separate charge. After that, support continues either as-needed (billed per visit) or through an annual maintenance contract — covered in detail in our AMC guide.

Do I get the system's programming files, or only the hardware?

On request, once the final payment is cleared, yes — the ETS project file on KNX, or manufacturer-cloud access or a transfer on Crestron and Lutron, plus admin credentials and as-built drawings. This is what lets the system be maintained or extended later, by Agrima or by another integrator you choose.

Related: Home automation cost guide · Package tiers · AMC & after-sales support · FAQ

Garveshh Bharania is a co-founder of Agrima Solutions, a Crestron, Lutron and KNX integrator with offices in Ahmedabad and Rajkot. In 2026 he won the Excellence Award in the Residential Villa – System Integrator category at the Smart Space Awards, Smart Home Expo Mumbai.

Talk to Agrima about a project

Call WhatsApp